MODERN SELF-LUBRICATING COMPOSITE MATERIALS BASED ON POLYTETRAFLUORETHYLIRENE

MATERIAL SCIENCE

  • D. I. Gventsadze Institute of Machinery Mechanics after R.Dvali, Tbilisi
  • B. R. Mazanishvili Institute of Machinery Mechanics after R.Dvali, Tbilisi
  • G. I. Mamniashvili Tbilisi State University after I. Djavakhishvili,Tbilisi,
  • A. I. Beroshvili Georgian State Technical University, Tbilisi
  • L. D. Gventsadze Georgian State Technical University, Tbilisi

Համառոտագիր

The results of investigation of physical-mechanical and tribological properties of polytetrafluorethylene (PTFE), composites filled with small (5-10 wt %) amounts of
nanoceramic and nano metallic powders are presented. BN, B4C and Co were used as nanopowder fillers. At compression by 30 MPa pressure they are subjected to 10 mass % filled composites on the base of B4C and Co is equal correspondingly to 3,20 and 2,46% that 6,5 and 8,5 times exceeds the index of unfilled polymer. The developed composites have 2...4 times better wear-resistance than that of the commercial “Superfluvis” on the base of PTFE.

Author Biographies

D. I. Gventsadze, Institute of Machinery Mechanics after R.Dvali, Tbilisi

Գվենցաձե Դավիդ Իլիչի - ավագ գիտաշխատող, տ.գ.դ., պրոֆեսոր, Ռ. Դվալու անվան Մեխանիկայի և մեքենաների ինստիտուտ

B. R. Mazanishvili, Institute of Machinery Mechanics after R.Dvali, Tbilisi

Մազանիշվիլի Բիչիկո Ռեզոի - ավագ գիտաշխատող, տ.գ.դ., պրոֆեսոր, Ռ. Դվալու անվան Մեխանիկայի և մեքենաների ինստիտուտ

G. I. Mamniashvili, Tbilisi State University after I. Djavakhishvili,Tbilisi,

Մամնիաշվիլի Գրիգոր Իվանի - առաջատար գիտաշխատող, տ.գ.դ., պրոֆեսոր, Է. Անդրոնիկաշվիլու անվան ֆիզիկայի ինստիտուտ

A. I. Beroshvili, Georgian State Technical University, Tbilisi

Բերոշվիլի Աբեսալոմ Իվանի - տ.գ.դ., պրոֆեսոր, Վրաստանի տեխնիկական համալսարան

L. D. Gventsadze, Georgian State Technical University, Tbilisi

Գվենցաձե Դավիդ Իլիչի - ավագ գիտաշխատող, տ.գ.դ., պրոֆեսոր, Ռ. Դվալու անվան Մեխանիկայի և մեքենաների ինստիտուտ

Տպագրված է
2015-05-31
Բաժին
Articles